Manual Powder Extraction Booth
The Surface Finishing Equipment Group - Hogg Blasting and Finishing Equipment in the Northeast UK, and Abraclean in Northwest UK can supply and install the full range of Manual Powder Booths which are specifically designed for powder coating and offers many advantages over traditional dry back booths.
Features
- A spray booth is a necessity for every powder coating operation to extract powder overspray from the work area, reducing health and fire hazards, and to control environmental emissions.
- Our Cartridge Booths are ideal for the powder coating industry. Operating on the principle that the powder laden air is drawn through pleated filter cartridges. Clean air is extracted, and the powder is trapped on the surface of the cartridges.
- Operating on a recirculating airflow principle. Air is drawn evenly across the face area and towards the filter section in the back of the enclosure. Over sprayed powder is drawn from the operators breathing zone, keeping the workplace clean and usable. This self-contained closed loop system causes no emissions to atmosphere thus eliminating environmental concerns.
- Pleated cartridges with a large surface area are used to maximise life and these are cleaned by a reverse air pulse allowing the Powder Booth to work at maximum efficiency. During the cleaning cycle a partial filter by-pass damper is operated, reducing airflow across the filter cartridges. This makes for more complete cleaning, whilst still containing dust within the enclosure.
- The clean air is diffused back into the work area at high level above the working enclosure. This means no ductwork to atmosphere is required, and no holes need be cut in the building. As air is returned to the factory, no separate fans for replacement “make-up” air are needed, and there is no heat loss from the factory.
- This wheel in “plug and play” stand-alone Extraction Booth requires only an electrical and compressed air supply for installation.
- A single slow speed belt driven fan delivers flexible performance with maximum efficiency. Similar Powder Booths with several powdered modules can consume more than double the electrical power.
- Collection bins are built to conveniently take standard powder boxes as liners in each wheeled bin section. The box of waste powder can then be stoved in the oven and placed in a skip. This avoids unnecessary transferring and handling of powder.


