Hoggajet Grit Recovery System
Introduction
The Hoggajet and Jetpump compact air operated recovery system has been tried and tested over many years in arduous situations and found to an be efficient, and cost effective machine for the recovery of particulate materials.
Incorporating the Jet pump as the prime mover, it can produce 14” Hg of vacuum when connected to an air supply of 250 cfm at 80-100 psi. At these levels 5-6 tonnes per hour of recovery can be obtained.
The system will recover solids in excess of 100 metres, dependent on particle size, type of material, volume and pressure of air supply. The Hoggajet has only has one moving part, and with no electrical power required there is no risk of fire of explosion.
Available for sale or hire from the The Surface Finishing Equipment Group - Hogg Blasting and Finishing Equipment in the Northeast UK and Abraclean in the Northwest UK
Method of Operation
All material is recovered through the gulper suction head and is drawn via the rubber lined hose into the cyclone. The vortex separates the fine dusts from the heavier materials which fall under gravity into the hopper for re-use. Any remaining dust travels along the flexible hose to the filter box. Inside the filter box 18 filters socks collect the dust as the airstream passes through. Clean air is discharged through the JetPump and silencer to atmosphere. The filter socks are cleaned each time the machine stops by reverse pulsing.
Technical Specification :
Power Source
Suction Hose
Recovery Rate
Dimensions Filter Box
Hopper / Cyclone
Weight
Filtration
Noise Level
Compressed Air – 250 cfm at 100 psi
2 ½ inch i.d. (max 4“)
Up to 5-6 tons / hour
79” x 53” x 52”
86” overall height x 43” x 37”
540 kg
Cyclone and 18 Filter Socks
83 dba at 2 metres