Blast Cabinets – Industrial Suction Feed
Introduction
Our Heavy Duty Suction Feed Blast Cabinets are industrial quality, free standing, self contained blast cleaning unit suitable for a wide range of blast media.
The only requirements other than abrasive are 3 phase power and compressed air connections.
Please note images 2 and 3 show optional accessories – i.e. tumbling basket, and turntable.
Key features include
- Heavy Gauge Steel Construction - provides extended cabinet operating life
- Safety Door Interlock - prevents system operation while cabinet door is open
- Cyclone Abrasive Separator - automatically recovers and cleans abrasive during operation
- Reverse Pulse Dry Cartridge Dust Collector - filters air flow prior to discharge to atmosphere
- Hard Wearing Rubber Gloves - protects operator and provides long wear life
- Laminated Glass Window With Quick Change
- Fully Adjustable Abrasive Feed Tee - allows the system to operate on most abrasive types
- Compressed Air Regulator And Gauge - allows blasting pressure to be varied for application
- High Performance Delta Suction Blast Gun – provides faster and more effective cleaning
- Blow Down Gun - remove dust from product after blasting
Technical Specification
Overall Dimensions |
2120mm high x 1200mm wide x 1600mm |
Shipping Weight |
450kg |
Work Area Size |
1200 mm wide x 915 mm deep x 900 mm high |
Door Opening |
800mm high x 860mm wide |
Viewing Window |
740mm wide x 290mm high |
Dust Collector Fan Size |
1.5kW 415 Volt 3 Phase |
Dust Collector Filter |
Single Dry Cartridge 21m² (225ft²) |
Dust Collector Purge |
Manual Reverse Pulse |
Blow Down Gun |
Standard |
Cabinet Light |
40 Watt 240 Volt |
Compressed Air Requirements |
12 – 50 cfm depending on nozzle size |
Commonly Used Abrasives
- Chilled Iron Grit
- Steel Grit
- Aluminium Oxide
- Steel Shot
- Garnet
- Glass Beads
Common Applications
- De-Scale And De-Rust Metal Surfaces
- Remove Paint And Powder Coating
- De-Burr, De-Flash And Remove Sand From Castings and Moldings
- Provide Decorative Finishes To Stainless Steel, Aluminium And Other Non Ferrous Metals
- Etching Of Glass, Stone And Metals
- Removal Of Release Agents And Contamination From Molds
Delta Suction Blast Gun Features
- Lightweight Aluminium Construction - reduces operator fatigue
- Tungsten Carbide Blast Nozzle - provides maximum operating life
- Hardened Steel Compressed Air Tip - controls air volume
- Various Sizes Available - can be sized to suit any compressed air supply and application
Available from The Surface Finishing Equipment Group - Abraclean in the Northwest UK and Hogg Blasting and Finishing Equipment in the Northeast UK.